As one would (and should) expect, the cost of entry is substantial. Adding the Phantom Drophead Coupé to one's personal fleet will cost $407,000 plus any additional options. But what an addition it'll make. The car's hand-welded aluminum spaceframe is constructed at a BMW facility in Germany and is wrapped in all-new body panels -- nothing is shared with the big-brother sedan. The suicide doors allow the A-pillar to run uninterrupted to the floor, increasing the body's stiffness. Overall, the convertible's lines are more rounded and smooth, giving it a classically sporting look that still retains the Phantom sedan's imposing presence.
Nautical influences drove some of the decisions made with regard to the car's interior. During its development, the team headed to Southampton to inspect a J-class yacht undergoing restoration. Since the Drophead Coupé is an open-top car, it would need to be able to handle the elements, and a yacht, with its constant exposure to water, seemed like a good place to do some research. As such, smooth, easily-wipeable seating surfaces are used (no perforated leather here), as well as carpet/floormat materials that are resistant to moisture. And let's not forget the teak decking on the hard tonneau -- that's the most obvious nautical influence of all.
Occupants sit in a sea of leather, wood and chrome, and when the weather's less than perfect, a cashmere-lined 5-layer roof protects them from the elements. Rolls-Royce says that this is the largest fabric roof used on a modern convertible -- a bragging right that could be challenged if Mercedes decides to bring out a production version of its Ocean Drive concept. We'd be remiss if we didn't mention the car's trunk, or "picnic boot" as Rolls-Royce calls it, which has a split opening. In addition to the traditional trunklid, there's a folding tailgate which acts as a bench capable of supporting 330 lbs.
Big, bold, and sublime, the Phantom Drophead Coupé is Rolls-Royce's halo car. Yes, the company maintains that the Phantom sedan is the standard-bearer, but this is better -- much better, in our opinion -- appealing to the romantic in all of us in a way the sedan never will. The gauntlet has been thrown down in the ultraluxury segment. Jay Gatsby, your car is waiting ...
We'll bring you more on the Drophead Coupé when we see it in person in a little over a week.
PRESS RELEASE / TECH SPECS:
ROLLS-ROYCE LAUNCHES PHANTOM DROPHEAD COUPÉ AT DETROIT
Rolls-Royce Motor Cars will unveil its new Phantom Drophead Coupé at the Detroit Motor Show on Sunday 7 January. Production of the new car will start at Goodwood in the summer of 2007.
The two-door, four-seat convertible is a less formal interpretation of classic Rolls-Royce design. Using the lightweight rigidity of an all-aluminium spaceframe, it marries modern technology to a sleek, streamlined convertible body.
Its exterior lines echo the timeless styling of the great Rolls-Royce cars: a long bonnet, large-diameter wheels, short front and long rear overhangs and the quintessential dynamic line descending along its flanks. Inside, the design emphasises the airy openness of top-down motoring, embracing the elements and creating a stunning, social environment.
Rolls-Royce Motor Cars Chief Designer, Ian Cameron, said, "This car gave us the chance to think about the very nature of convertible motoring and in particular what it means to Rolls-Royce. Above all we were determined to make this car a joy to live with and engineered it to give years of effortless service to its owner."
A number of features first seen on 100EX, the experimental convertible shown by Rolls-Royce in 2004, have been engineered into the new Phantom Drophead Coupé. Two of the most visually striking of these are the brushed steel bonnet and A-pillar and the teak decking for the rear hood cover. The brushed steel is machine finished to give a uniform grain before undergoing extensive hand polishing to achieve a perfect sheen. At the rear, the teak decking is treated with a carefully blended mix of oils to preserve a natural finish and a long lasting lustre that is as beautiful as it is hardy.
Front opening coach doors have been homologated for the new car and add considerably to the ease of access to the rear seat, as well as to the overall aesthetics. Unique to Rolls-Royce, the doors dramatically transform the Phantom Drophead Coupé's looks, giving a side profile reminiscent of classic sports cars of the '60s. Crucially, they also aid the overall stiffness of the body as the rear hinged doors allow for an uninterrupted A-pillar. Rolls-Royce Phantom Drophead Coupé
INTRODUCTION
In 2004, Rolls-Royce unveiled 100EX, a striking experimental drophead built to celebrate 100 years of arguably the most famous automotive brand in the world. Built without compromise, it encapsulated a century of elegance and engineering, and, in an instant, defined the future direction of the brand.
In its two world tours, 100EX garnered positive comments from customers and the media alike. Such was the strength of the reaction that, in the autumn of 2005, Rolls-Royce announced that a production version would be available by 2007. In the interim years, the team at Goodwood have worked tirelessly to turn the experimental car into a reality.
Launched at the Detroit Motor Show 2006, the Phantom Drophead Coupé is the second new model from Rolls-Royce since BMW Group became custodian of the marque in 1998. The two-door, four-seat convertible is a less formal interpretation of classic Rolls-Royce design. Using the lightweight rigidity of an all-aluminium spaceframe, it marries modern technology to a sleek, streamlined convertible body.
Its exterior lines echo the timeless styling of the great Rolls-Royce cars: a long bonnet, large-diameter wheels, short front and long rear overhangs and the quintessential dynamic line descending along its flanks. Inside, the design emphasises the airy openness of top-down motoring, embracing the elements and creating a stunning, social environment.
The Phantom Drophead Coupé has been carefully crafted to be aesthetically pleasing, yet practical too. Wood, leather, chrome and brushed steel have been used where most appropriate. Form and function have equal billing. The simplicity of the design belies a car built to provide years of effortless service.
The Phantom Drophead Coupé offers owners an unparalleled convertible experience, combining compelling driveability with exceptional engineering, technology and design – hand-crafted from the finest materials to an exceptional level of quality.
DESIGN
From the outset, the design team at Goodwood were adamant that the Phantom Drophead Coupé should be more than simply a convertible version of the Phantom. "Designing without compromise meant that, to a certain extent, we had to start again," says Rolls-Royce Chief Designer Ian Cameron. "Simply removing the Phantom's roof could have made a great convertible but it wouldn't have made a perfect one. With the Phantom Drophead Coupé we had the chance to think about the very nature of convertible motoring and, in particular, what it means to Rolls-Royce."
Every exterior panel on the Phantom Drophead Coupé is new, echoing the Phantom's style but with carefully considered proportions more suited to the shorter body. From the raked front end to the sweeping rear, every aspect was studied at length to ensure that the finished car looked purposeful and elegant both with the hood up and with it stowed. For the interior, the concept was simple: bring the outside in. Create a social space enabling occupants to embrace the elements using sumptuous, relevant materials.
As well as considering the finer details of the package – seating arrangements and dashboard layouts, for example – the designers also developed some fundamental beliefs about how the materials they were using should work. The entire team was keen to keep things as natural as possible and, as a result, there is an instant, raw beauty to the Phantom Drophead Coupé. Materials are used in a way that emphasises their natural charm and there is an immediacy to the exposed elements of brushed steel and solid teak. Bleaches, stains and lacquers were shunned as far as possible in favour of more natural finishes. Hands touch only chrome, leather or wood. Other materials, such as the brushed steel, are used as architectural detailing, giving the whole car a sense of visual tactility.
"The Phantom Drophead Coupé is about emphasising the essentials of pleasure," says Cameron. "Above all, we were determined to make this car a joy to live with. Rolls-Royce is the opposite of stiff formality. Why would you design and build a car like this and not make it fun to use?"
EXTERIOR
The profile of the Phantom Drophead Coupé is fundamentally transformed from that of a conventional four-seat convertible by the inclusion of front coach doors. Evocative of the classic sports car profile, they add considerably to the easy entry and exit of rear passengers. Perhaps just as importantly, they also add significantly to the overall strength and stiffness of the body as they allow the construction of an uninterrupted A-pillar. Newly homologated for the Phantom Drophead Coupé, these coach doors are unique to Rolls-Royce.
At the front sits a new, more rakish grille, giving the car a more casual air while retaining its classic looks. Finished in steel, the centre fins are polished while the surround is brushed to match the optional brushed steel bonnet and A-pillar. The grille is hinged at the top in order to give way in the event of a low-speed impact. On top sits the Spirit of Ecstasy, remodelled using advanced computer software. These days she has a more lifelike appearance, with clear definition of her features. Finished in stainless steel, the Spirit of Ecstasy is also available in silver or gold via the Bespoke programme at Goodwood.
The front end of the Phantom Drophead Coupé is more streamlined than that of previous Rolls-Royce cars. Slim front LED side lights sit above larger round driving lamps. The front bumper is integrated into the design, further softening the look. A discreet camera nestles underneath the numberplate to provide an excellent split-screen view of the road ahead, via the on-board monitor, to help when parking or when pulling out of a side road.
One of the best visual clues to the Phantom Drophead Coupé's character can be found at the rear. The picnic boot is the very essence of automotive affability. The only type of its kind on any convertible, it offers easy access to the luggage compartment as well as providing comfortable outdoor seating for two adults. The substantial hinges are able to accommodate a weight of 150 kg / 330 lb. Inside the boot, 315 litres / 11.1 cu ft of space is enough to house three sets of golf clubs. Importantly, this space remains intact whether the hood is raised or lowered.
An entirely new palette of nine exterior colours has been developed for the Phantom Drophead Coupé: Metropolitan Blue, Admiral Blue, Jubilee Silver, Diamond Black, Duck Egg Blue, Semaphore Yellow, English White, Woodland Green and Ensign Red. These are complimented with hood colours in Silver, Black, Beige, Navy Blue, Deep Red and Deep Green.
Two of the most visually stunning options are the teak decking for the rear hood cover and the brushed steel bonnet and A-pillar. First seen on the 100EX experimental car in 2004, these are signature elements of the Phantom Drophead Coupé look. The brushed finish of the bonnet and A-pillar apes the classic Phantoms of the '20s and '30s but with a delightful 21st century twist.
The rear teak decking epitomises the careful design and attention to detail seen throughout the Phantom Drophead Coupé. It is as functional as it is beautiful. Teak was used because of its inherently hardy properties and its resistance to moisture and decay. Special techniques were developed in the Rolls-Royce wood shop to preserve the appearance of a fresh, unprocessed finish, the aim being to have a final deck that was as close to natural timber as possible. "We wanted it to look as if it had been cut and hand-finished 10 minutes ago," said Alan Sheppard, Chief Interior Designer. More than 30 individual pieces of teak go into each deck, protected by a specially formulated blend of oils. As with all the woods and veneers used by Rolls-Royce, it is sourced from sustainable forests by a team of specialists.
The hood is the largest of any modern convertible. Its acoustic insulation is exemplary, with five layers of insulation material between occupants and the outside world. Lined with a cashmere blend, the structure is more like a bespoke suit than a traditional fabric roof. Rolls-Royce was keen to use a fabric roof rather than a folding hard-top for many reasons, not least aesthetics. As Ian Cameron describes, "There is nothing more romantic than driving a convertible in the rain at night and hearing the drops hit the roof. In conversation with our customers we realised that they felt the same way." A further benefit of the tailored, soft-top roof is the relatively small space required to stow it.
INTERIOR
The interior concept revolves around the idea of an indoor/outdoor space: an all-weather passenger compartment that combines the practicality required for convertible motoring with the sumptuous elegance expected of Rolls-Royce. Rather than take inspiration solely from the automotive world, Chief Interior Designer Alan Shepherd looked elsewhere. "In 2004, when we were designing 100EX, we visited a boatyard in Southampton where one of the famous 1930s America's Cup J-class yachts was being restored. We were struck by the variety and uses of different materials throughout. All of the J-class yachts have a tremendous sense of purposeful elegance about them, and this was something that we were keen to emulate."
The Phantom Drophead Coupé has been designed as a car in which to enjoy the elements. The all-weather surfaces of the interior have been designed to take what nature can throw at them. "We didn't want owners to feel as if they had to pull over at the first spot of rain," says Cameron. To this end, a number of notable features can be seen throughout the interior. Firstly, the seats have no ridges in them, giving a smooth surface so that moisture can be wiped straight off. In place of traditional floor mats, wholly more practical sisal mats are used. Even the carpet itself employs 21st century materials designed to deal with the moisture and humidity encountered in many areas of the world.
The front seats are slimmer than the Phantom's but still offer an uncompromised degree of comfort. Integrated seatbelts are mounted directly onto them, while active head restraints and seat squab airbags give further protection to the torso and head. The driving position is set deliberately high to give a commanding view of the road over the long bonnet, and the curved rear lounge seats offer an intimate, social environment for passengers. Rear legroom is excellent and marks the car out as a true four-seater.
An exceptional sound system has been specially designed for the Phantom Drophead Coupé, taking into account the differing acoustic properties of the convertible. Nine channels of sound arrive via 15 speakers, creating a stereophonic experience to impress the most hardened audiophiles.
ENGINEERING
The challenge in designing any convertible lies in retaining a high degree of torsional rigidity throughout the body while keeping weight down. Torsional rigidity is vital to minimise the scuttle shake associated with most convertible cars and to help maintain the car's dynamic composure.
Extensive testing and research were carried out before the engineering team were completely satisfied. Tens of thousands of kilometres were driven over rough road surfaces to help identify and eliminate potential problems. The result is a spaceframe chassis that makes the Phantom Drophead Coupé perhaps the most rigid convertible available today. The clearest indicator of this incredible strength and stiffness can be seen in the rear-view mirror, which shows no vibration at all, even at high speed.
A great deal of this is due to the modifications around the triangulated A-pillar. The entire windscreen surround was designed to be an integral part of the roll-over protection system. Consequently the A-pillar struts run right down to the floor of the car. Additional aluminium extrusions have been utilised, along with wider sills. The rear haunches have single extrusion beams running at waist height on either side. In all, more than 140 metres / 460 ft of weld go into each Phantom Drophead Coupé body – 20 metres / 65 ft more than in the Phantom. Incorporated into the rear spaceframe structure is the concealed roll-over protection system which deploys from within the rear head restraints in just a fraction of a second in the event of an accident. A ratchet system then locks them in place.
Further adding to occupant safety, frontal impacts are absorbed by crumple zones directed into Y-shaped chassis members and the main understructure – the strongest part of the chassis. Side impact intrusion is minimised by the double-skinned floor construction, strong side sills and integral side impact bars in each door. Additional braces above and below the engine bay and under the rear axle add further rigidity to the spaceframe.
Other safety systems include intelligent braking and restraint systems, combined with integral seatbelts. As a result, the Phantom Drophead Coupé is perhaps the safest convertible car on the market.
The spaceframe is constructed at the BMW centre for aluminium competence in Dingolfing, Germany. Manufactured to within a tolerance of just 0.1 mm / 0.004 in, each spaceframe is welded entirely by hand. They are then checked by a computer-guided machine to ensure absolute accuracy.
One of the more interesting problems encountered by the engineering team was the proximity of the optional brushed steel bonnet to the aluminium front wings. These materials are not normally used alongside each other due to the adverse corrosion effects of aluminium on steel. An integral part of the testing process was a 20-year-old DeLorean car. Manufactured with stainless steel exterior panels, it provided an interesting case study into the long-term durability of the material.
All of the panels used on the Phantom Drophead Coupé are unique to this car, representing some of the 1300 new parts used. Unlike on the Phantom, the front wings have been constructed from aluminium using the 'superform' technique, in which aluminium is heated to the critical temperature before being literally sucked down over a mould to form the large, complex shape.
DRIVING
The Phantom Drophead Coupé's advanced aluminium spaceframe is at the heart of its refined, dynamic driving experience. Lightweight and exceptionally strong, it impacts positively on ride, comfort and safety. Its inherent rigidity is essential in isolating vibration and maintaining the hushed interior calm associated with the brand. The new car is shorter than the Phantom by 250 mm / 9.8 in, so turn-in is slightly quicker, making for a wholly more agile driving experience.
A lower centre of gravity, combined with the reduced wheelbase and incredibly stiff body, produces a ride that is on the refined, comfortable side of sporty. Feedback from the wheels is informative but not intrusive. Imperfect road surfaces go unnoticed while feel through the steering wheel inspires confidence. New spring dampers and lighter anti-roll bars have been engineered to maintain comfort without loss of agility. Self-levelling air struts continuously adjust for increased loading in harder cornering, giving drivers the ability to place the car through turns with absolute precision.
The front double-wishbone suspension features a hydraulic mount to minimise vibration through the steering wheel. Multi-link rear suspension is designed for increased ride comfort with anti-lift and anti-dive technology.
With no fixed roof, much of the Phantom Drophead Coupé's weight naturally sits lower and further forward than in the Phantom, due to the structural roll-over protection built into the A-pillar. Nonetheless, a 50:50 weight distribution has been maintained.
Other heavy components – the engine, gearbox and propshaft, for example – sit as low as possible, again contributing to the low centre of gravity.
Grip is provided by standard-fit Michelin PAX run-flat tyres, metrically sized at 540 mm (approximately 20 inches in diameter). These tyres enable the Phantom Drophead Coupé to run for at least 100 miles / 160 km at speeds up to 50 mph / 80 km/h before being replaced. A remarkable level of control still exists, even with a tyre fully deflated. Optional 21-inch wheels with Goodyear run-flat EMT tyres are also available, sitting on nine-spoke rims. The inclusion of run-flat tyre technology removes the need for spare wheels and a jack, freeing up space in the luggage compartment.
Since the weight of the wheels has a direct impact on ride comfort and driving dynamics, Rolls-Royce has developed a lightweight ceramic core to the wheels to reduce unsprung weight.
Ample power is supplied by a 6.75-litre, naturally aspirated, V12 engine. Developing 453 bhp / 338 kW and 720 Nm / 531 lb ft of torque at 3500 rpm, delivery is smooth and abundant. Furthermore, with 75 per cent of engine power available at just 1000 rpm, progress from a standstill is easy and remains so throughout the rev range. The highly efficient unit uses direct injection and variable valve timing. The engine is mated to a six-speed ZF automatic shift-by-wire gearbox.
The powerful V12 will accelerate the Phantom Drophead Coupé to 60 mph in under six seconds and on to a limited top speed of 149 mph / 240 km/h. It stops in equally impressive fashion, using 374 mm / 14.7 in ventilated disc brakes at the front and 370 mm / 14.5 in at the rear. Twin piston alloy callipers at the front and single piston callipers at the rear bring the large-diameter wheels to rest. The braking system incorporates the latest four-channel anti-lock system. Emergency Brake Assist steps in under heavy braking, immediately applying full force in an emergency. At rest, an electromechanical park brake can be applied via a button on the dashboard.
For maximum active safety, the sophisticated braking system is supplemented by an advanced dynamic stability control system that gives outstanding car control in an emergency situation.
Final testing was carried out in several locations around the world. The hot-weather tests took place in the stifling heat of Death Valley, USA and the Namibian desert, while cold-weather testing was undertaken in the harsh winter conditions of Scandinavia.
CRAFTSMANSHIP
Craftsmanship is a hallmark of Rolls-Royce. From the traditional wood and leather workshop skills to the complex welding of the aluminium spaceframe, a 21st century Rolls-Royce is a blend of hand crafted expertise and high-tech materials and techniques.
With more than 350 man-hours invested in each car, not including the time taken to build the engine, nearly right is never acceptable. The maxim of company founder Sir Henry Royce still resonates around Goodwood today: "Strive for perfection in everything you do." From day-to-day production cars to the often complex Bespoke requests, Rolls-Royce has a skilled team adept at meeting the challenges of crafting the finest cars for the most discerning customers.
For example, a number of the individual leather pieces used in the Phantom Drophead Coupé are larger than those in the Phantom, which makes their selection and usage more difficult because of naturally occurring blemishes and imperfections. The skill comes in using each hide in such a way that these natural marks are hidden or discarded, minimising waste and resulting in a perfect finish.
Other new materials, such as the teak and brushed steel, bring with them their own unique challenges. Wood is a defining feature of the Phantom Drophead Coupé, and the woodshop team can spend up to a month preparing, matching, shaping and finishing each car's set. The teak deck is finished with a specially formulated oil blend to ensure a rich, natural, longer-lasting lustre. Its use on the Phantom Drophead Coupé is unlike any other in the automotive industry. With the brushed steel, the difficulty lies in getting exactly the same look to each of the parts – the grille, the bonnet and the A-pillar. After a great deal of research and testing, machine-brushing finished by hand-polishing was deemed the best way of achieving a uniform grain.
Craftsmanship can be found throughout the Phantom Drophead Coupé, from the largest, most visible parts down to the smallest, unseen detail. By constructing each car with the same enthusiasm and passion with which it was designed, Rolls-Royce ensures that each one will offer a unique motoring experience, both to its owners and to all those who will travel in it.
COLOUR AND TRIM
Exterior colours:
• Metropolitan Blue
• Admiral Blue
• Duck Egg Blue
• Jubilee Silver
• English White
• Semaphore Yellow
• Ensign Red
• Woodland Green
• Diamond Black
Hood colours:
• Silver
• Black
• Beige
• Deep Red
• Deep Green
• Navy Blue
Interior leather:
• Crème Light
• Black
• Fleet Blue
• Moccasin
• Pine Green
• Roseleaf
• Fawn Brown
• Dark Spice
• Consort Red
• Signal Red
Interior veneers:
• Elm Cluster
• Piano Black
• Brown Oak
• Ash Burr
• Mahogany Flare
• Rosewood World version
TECHNICAL SPECIFICATIONS: WORLD
Dimensions
Number of doors / seats 2 / 4
Vehicle length 5609 mm / 220.8 in
Vehicle width 1987 mm / 78.2 in
Vehicle height (unladen) 1581 mm / 62.2 in
Wheelbase 3320 mm / 130.7 in
Turning circle 13.1 m / 43.0 ft
Track, front 1687 mm / 66.4 in
Track, rear 1671 mm / 65.8 in
Width at shoulder height, front 1491 mm / 58.7 in
Width at shoulder height, rear 1298 mm / 51.1 in
Elbow room, front 1562 mm / 61.5 in
Elbow room, rear 1266 mm / 49.8 in
Head room, front 980 mm / 38.6 in
Head room, rear 943 mm / 37.1 in
Boot volume (DIN) 315 ltr / 11.1 cu ft
Fuel tank capacity 80 ltr / 17.6 Imp gal
Weight
Unladen weight (DIN) 2620 kg / 5776 lb
Axle load ratio, rear (unladen) 51.4 %
Gross vehicle weight 3050 kg / 6724 lb
Payload 430 kg / 948 lb
Axle load limit, front 1425 kg / 3142 lb
Axle load limit, rear 1800 kg / 3968 lb
Engine & transmission
Engine / cylinders / valves V / 12 / 48
Fuel management Direct injection
Displacement 6749 cc / 411.8 cu in
Stroke 84.6 mm / 3.33 in
Bore 92.0 mm / 3.62 in
Power output @ engine speed 453 bhp / 460 PS (DIN) / 338 kW @ 5350 rpm
Max torque @ engine speed 720 Nm / 531 lb ft @ 3500 rpm
Compression ratio / fuel type 11:1 / premium unleaded1
Transmission type ZF 6HP32
Transmission ratios:
1st / 2nd / 3rd / 4.171 / 2.340 / 1.521 /
4th / 5th / 6th 1.143 / 0.867 / 0.691
Reverse 3.403
Final-drive ratio 3.460
Steering & brakes
Steering type Rack & pinion, speed-sensitive variable-rate power assistance
Brakes, front / diameter Ventilated disc / 374 mm / 14.7 in
Brakes, rear / diameter Ventilated disc / 370 mm / 14.6 in
Aerodynamics
Drag Cd 0.37
Drag Cd x A 1.004 m2 / 10.8 ft2
Performance2
Top speed 149 mph / 240 km/h (governed)
Acceleration 0-100 km/h 5.9 sec
Fuel consumption2
Urban To be confirmed
Extra urban To be confirmed
Combined / range To be confirmed
CO2 emissions To be confirmed
Wheels (standard PAX alloy)
Tyre, front & rear Michelin PAX 265/790 R540 A 111W
Wheel rim, front & rear PAX 265 x 540 A ALU
Wheels (21 in alloy)
Tyre, front Goodyear EMT 255/50 R21 106W
Wheel size, front 8 in x 21 in
Tyre, rear Goodyear EMT 285/45 R21 109W
Wheel size, rear 9.5 in x 21 in
1. The engine is designed for octane grade 98 fuel; however, it may be run on fuel with a minimum octane grade of 91.
2. Subject to final verification.
TECHNICAL SPECIFICATIONS: US VERSION
Dimensions
Number of doors / seats 2 / 4
Vehicle length 5609 mm / 220.8 in
Vehicle width 1987 mm / 78.2 in
Vehicle height (unladen) 1581 mm / 62.2 in
Wheelbase 3320 mm / 130.7 in
Turning circle 13.1 m / 43.0 ft
Track, front 1687 mm / 66.4 in
Track, rear 1671 mm / 65.8 in
Width at shoulder height, front 1491 mm / 58.7 in
Width at shoulder height, rear 1298 mm / 51.1 in
Elbow room, front 1562 mm / 61.5 in
Elbow room, rear 1266 mm / 49.8 in
Head room, front 980 mm / 38.6 in
Head room, rear 943 mm / 37.1 in
Trunk volume (SAE) To be confirmed
Fuel tank capacity 80 ltr / 21.1 US gal
Weight
Curb weight 2620 kg / 5776 lb
Axle load ratio, rear (unladen) 51.4 %
Gross vehicle weight 3050 kg / 6724 lb
Payload 430 kg / 948 lb
Axle load limit, front 1425 kg / 3142 lb
Axle load limit, rear 1800 kg / 3968 lb
Engine & transmission
Engine / cylinders / valves V / 12 / 48
Fuel management Direct injection
Displacement 6749 cc / 411.8 cu in
Stroke 84.6 mm / 3.33 in
Bore 92.0 mm / 3.62 in
Power output @ engine speed 453 bhp / 460 PS (DIN) / 338 kW @ 5350 rpm
Max torque @ engine speed 720 Nm / 531 lb ft @ 3500 rpm
Compression ratio / fuel type 11:1 / premium unleaded1
Transmission type ZF 6HP32
Transmission ratios:
1st / 2nd / 3rd / 4.171 / 2.340 / 1.521 /
4th / 5th / 6th / 1.143 / 0.867 / 0.691
Reverse 3.403
Final-drive ratio 3.460
Steering & brakes
Steering type Rack & pinion, speed-sensitive variable-rate power assistance
Brakes, front / diameter Ventilated disc / 374 mm / 14.7 in
Brakes, rear / diameter Ventilated disc / 370 mm / 14.6 in
Aerodynamics
Drag Cd 0.37
Drag Cd x A 1.004 m2 / 10.8 ft2
Performance2
Top speed 149 mph / 240 km/h (governed)
Acceleration 0-60 mph 5.7 sec
Fuel consumption3
City To be confirmed
Highway To be confirmed
Combined / range To be confirmed
CO2 emissions To be confirmed
Wheels (standard PAX alloy)4/5
Tire, front & rear Michelin PAX 265/790 R540 A 111W
Wheel rim, front & rear PAX 265 x 540 A ALU
Wheels (21 in alloy)5/6
Tire, front Goodyear EMT 255/50 R21 106W
Wheel size, front 8 in x 21 in
Tire, rear Goodyear EMT 285/45 R21 109W
Wheel size, rear 9.5 in x 21 in
Luggage is housed within a picnic boot, a split tail compartment that opens in two parts giving easy access to the 315 litres of space. The lower tailgate provides a comfortable seating platform for two adults when lowered. Careful engineering of the folding soft-top roof means that it stows in a relatively small space resulting in a luggage compartment that remains unaffected regardless of whether the roof is up or down.
The fabric hood is the largest of any modern convertible car and its acoustic insulation is exemplary. Five layers of material ensure that the cabin remains a serene space, even at speed. Lined with cashmere it has been tailored to stow in a relatively small space.
At the core of the Phantom Drophead Coupé is an advanced aluminium chassis, perhaps the single most significant component in delivering the marques legendary refinement. Lightweight and exceptionally strong, it impacts positively on ride comfort, handling and safety. Hand made, it requires over 140 meters of welding in each chassis. Power is supplied by the same 6.75 litre naturally aspirated V12 engine found in the Phantom saloon, giving brisk performance and a 0-60mph time of 5.7 seconds.
Rolls-Royce Motor Cars Chairman and Chief Executive, Ian Robertson, said, "The Phantom Drophead Coupé marks the next chapter in our history. While the saloon continues as the brand flagship, the Drophead leads us in a more informal direction, attracting new buyers to the marque. In the coming years other new models will strengthen the company still further."
The Phantom Drophead Coupé has been carefully crafted to be aesthetically pleasing, yet practical too. Wood, leather, chrome and brushed steel have been used where most appropriate. Form and function have equal billing. The simplicity of the design belies a car built to provide years of effortless service. It will offer owners an unparalleled convertible experience, combining compelling driveability with exceptional engineering, technology and design – hand crafted from the finest materials to an exceptional level of quality.
Photo Gallery>>>
Related entries:
Rolls-Royce CoupeRolls-Royce Coupe Spied Again
The multi millionaires and billionaires of the world have a rough life, so tuning company EDAG has decided to make things a little easier for them. Debuting at the Geneva Auto Show the EDAG Rolls-Royce Phantom has an articulating roof design that eliminates the need for rear passengers to duck down as they enter the car.
Feeling frustrated that your Rolls-Royce Phantom doesn’t have enough room for you and your entourage, forcing you to take a less glamorous vehicle with seating for six? If so German coachbuilder Mutec has created the solution, by introducing a version of the Phantom that has been stretched 43 inches.
It was 100 years ago this week that a new marque established itself in the minds of the British public as the world's finest car। Just over 12 months after Frederick Henry Royce and Charles Stewart Rolls began manufacturing cars together, the company's new Silver Ghost won the gold medal in its class for hill climbing speed and reliability at the 1907 Scottish Reliability Trial. Later that year, a Silver Ghost travelled 14,371 miles non-stop to set the world record for a motor run, the publicity further reinforcing perceptions of the name which went on to become a metaphor for excellence the world over. To mark the 100th anniversary of the Silver Ghost, Rolls-Royce has produced a special model, the Phantom Silver , of which only 25 will be made. The Phantom Silver will carry a UKP22,000 premium over the standard Phantom price of UKP220,000.
